{"title":"Fiberseeker","description":"\u003cp\u003eFibreSeeker continuous carbon fibre 3D printers — desktop composite manufacturing. Available from InnoStation 3D, authorised reseller.\u003c\/p\u003e","products":[{"product_id":"fiberseeker-explorer-3-continuous-carbon-fibre-3d-printer","title":"Fiberseeker 探索者 3 Continuous Carbon Fibre 3D Printer","description":"\u003ch2\u003eThe world's first desktop continuous carbon fibre 3D printer\u003c\/h2\u003e\n\u003cp\u003eFibreSeeker 3 (探索者 3) brings continuous carbon fibre printing out of the industrial workshop and onto your desk. Using FibreSeek's patented \u003cstrong\u003eComposite Fibre Co-extrusion (CFC)\u003c\/strong\u003e technology, dry continuous carbon fibre is impregnated with liquid polymer in real time as it feeds into the printhead, forming a pre-impregnated strand that is co-extruded alongside standard thermoplastic filament. The continuous fibre carries structural load along engineered paths inside the part — much like steel rebar in concrete — so strength goes exactly where you need it.\u003c\/p\u003e\n\n\u003ch3\u003eWhy continuous fibre beats chopped fibre\u003c\/h3\u003e\n\u003cp\u003eShort carbon fibre dispersed in filament stops at the pellet. Continuous fibre runs the full length of the load path, which is why parts printed on the FibreSeeker 3 reach \u003cstrong\u003eup to 900 MPa\u003c\/strong\u003e tensile strength — roughly ten times conventional FFF. Parts that used to be machined from aluminium can now be printed in a day, at a fraction of the cost and with almost no waste.\u003c\/p\u003e\n\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuild volume:\u003c\/strong\u003e 300 × 300 × 245 mm — large enough for drone frames, brackets and tooling\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax print speed:\u003c\/strong\u003e 500 mm\/s (FFF mode)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented dual-nozzle system:\u003c\/strong\u003e one hot-end for standard FDM, one for continuous fibre — switch within a single job\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e65 °C actively heated chamber:\u003c\/strong\u003e dimensional accuracy on large parts, less warping\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic bed levelling and calibration:\u003c\/strong\u003e no manual tuning for a perfect first layer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated monitoring camera:\u003c\/strong\u003e real-time view plus automatic time-lapse of every build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported plastics:\u003c\/strong\u003e PLA, PETG, PC, PA — not locked into proprietary nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRocket Slicer Suite:\u003c\/strong\u003e analyses part geometry and proposes reinforcement paths, with Speedy \/ Reinforced \/ Fortified modes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDevice weight:\u003c\/strong\u003e 32 kg net (approx. 40 kg with packaging)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat you can print\u003c\/h3\u003e\n\u003cp\u003eLightweight brackets and mounts, robotics links, drone frames, jigs and fixtures, tooling jaws, end-use functional parts. The sweet spot is medium-to-large structural components where stiffness and strength matter in the X and Y axes. A reviewer recently printed a spring-action carabiner in clear PETG with minimal fibre reinforcement and it held 20 kg on a tiny hook — on the lowest reinforcement setting.\u003c\/p\u003e\n\n\u003ch3\u003eWhere CFC is not the answer\u003c\/h3\u003e\n\u003cp\u003eContinuous fibre does not like tight bends, and the coated-fibre extrusion path is thicker than plain FDM. Tiny parts with narrow hooks are a poor fit, and print times run longer than high-speed FDM because the machine parks, cuts, switches nozzles and purges between layers. This is not a general-purpose printer — it is a production tool for load-bearing composite parts.\u003c\/p\u003e\n\n\u003ch3\u003eFull technical specifications\u003c\/h3\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;font-size:14px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;width:42%;\"\u003eTechnology (fibre)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eComposite Fibre Co-extrusion (CFC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eTechnology (plastic)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eFused Filament Fabrication (FFF)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eDevice dimensions\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e615 × 595 × 540 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eDevice weight (net)\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e32 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eBuild volume\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e300 × 300 × 245 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003ePrinting accuracy\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e±0.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eMinimum layer thickness\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e50 μm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eHotend\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eAll metal, hardened steel nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eMax nozzle temperature\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e350 °C (both FFF and CFC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eNozzle diameter\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e0.4 mm (FFF) \/ 0.7 mm (CFC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eFibre cutter\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eBuilt-in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eActive chamber heating\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eUp to 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eMax heatbed temperature\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e110 °C, fully automatic levelling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eMax FFF speed\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eMax CFC speed\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e20 cc\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eSupported FFF materials\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003ePLA, PETG, PC, PA, PACF, PETGF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eSupported CFC fibre\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eX-CCF, X-CGF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eComposite tensile strength\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eUp to 900 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003ePower\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e100–120 VAC \/ 200–240 VAC, 50\/60 Hz, max 1350 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eControl screen\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003e5-inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eStorage\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eBuilt-in 32 GB eMMC + USB port\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eSensors\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003ePlastic breakage, plastic clogging, fibre breakage, fibre clogging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eCamera\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eBuilt-in 1280×720 live view\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eSlicer\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eFibreSeek Aura (FFF + CFC), Windows \/ Mac\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"background:#f6f6f6;\"\u003e\n\u003ctd style=\"padding:6px 10px;font-weight:600;\"\u003eFile formats\u003c\/td\u003e\n\u003ctd style=\"padding:6px 10px;\"\u003eSTL, STP, 3MF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eIn the box\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × FibreSeeker 3 continuous fibre 3D printer\u003c\/li\u003e\n\u003cli\u003e1 × spool of CCF continuous carbon fibre filament\u003c\/li\u003e\n\u003cli\u003e2 × spools of PLA filament\u003c\/li\u003e\n\u003cli\u003e1 × printing accessory kit\u003c\/li\u003e\n\u003cli\u003ePower cord (EU 200–240 V configuration supplied for our customers)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBuying from InnoStation 3D\u003c\/h3\u003e\n\u003cp\u003eInnoStation 3D is an authorised reseller of FibreSeeker products in Europe. Every machine ships with EU power configuration, full local warranty support and English-language technical assistance from our team. Need a quote for multiple units, an invoice for company purchase, or advice on whether continuous fibre suits your application? Contact us before ordering and we will help you specify the right setup.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eFibreSeeker 3 is manufactured by FibreSeek. InnoStation 3D is an independent authorised reseller.\u003c\/em\u003e\u003c\/p\u003e","brand":"Fiberseeker","offers":[{"title":"Default Title","offer_id":50009126764699,"sku":null,"price":2799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0739\/4495\/7083\/files\/fiberseeker-3-01.jpg?v=1793522402"}],"url":"https:\/\/www.innostation3d.net\/en\/collections\/fiberseeker.oembed","provider":"Top 10 3D printing online shop\/InnoStation 3D","version":"1.0","type":"link"}