Fiberseeker 探索者 3 Continuous Carbon Fibre 3D Printer
Verfügbarkeit für Abholungen konnte nicht geladen werden
The world's first desktop continuous carbon fibre 3D printer
FibreSeeker 3 (探索者 3) brings continuous carbon fibre printing out of the industrial workshop and onto your desk. Using FibreSeek's patented Composite Fibre Co-extrusion (CFC) technology, dry continuous carbon fibre is impregnated with liquid polymer in real time as it feeds into the printhead, forming a pre-impregnated strand that is co-extruded alongside standard thermoplastic filament. The continuous fibre carries structural load along engineered paths inside the part — much like steel rebar in concrete — so strength goes exactly where you need it.
Why continuous fibre beats chopped fibre
Short carbon fibre dispersed in filament stops at the pellet. Continuous fibre runs the full length of the load path, which is why parts printed on the FibreSeeker 3 reach up to 900 MPa tensile strength — roughly ten times conventional FFF. Parts that used to be machined from aluminium can now be printed in a day, at a fraction of the cost and with almost no waste.
Key specifications
- Build volume: 300 × 300 × 245 mm — large enough for drone frames, brackets and tooling
- Max print speed: 500 mm/s (FFF mode)
- Patented dual-nozzle system: one hot-end for standard FDM, one for continuous fibre — switch within a single job
- 65 °C actively heated chamber: dimensional accuracy on large parts, less warping
- Automatic bed levelling and calibration: no manual tuning for a perfect first layer
- Integrated monitoring camera: real-time view plus automatic time-lapse of every build
- Supported plastics: PLA, PETG, PC, PA — not locked into proprietary nylon
- Rocket Slicer Suite: analyses part geometry and proposes reinforcement paths, with Speedy / Reinforced / Fortified modes
- Device weight: 32 kg net (approx. 40 kg with packaging)
What you can print
Lightweight brackets and mounts, robotics links, drone frames, jigs and fixtures, tooling jaws, end-use functional parts. The sweet spot is medium-to-large structural components where stiffness and strength matter in the X and Y axes. A reviewer recently printed a spring-action carabiner in clear PETG with minimal fibre reinforcement and it held 20 kg on a tiny hook — on the lowest reinforcement setting.
Where CFC is not the answer
Continuous fibre does not like tight bends, and the coated-fibre extrusion path is thicker than plain FDM. Tiny parts with narrow hooks are a poor fit, and print times run longer than high-speed FDM because the machine parks, cuts, switches nozzles and purges between layers. This is not a general-purpose printer — it is a production tool for load-bearing composite parts.
Full technical specifications
| Technology (fibre) | Composite Fibre Co-extrusion (CFC) |
| Technology (plastic) | Fused Filament Fabrication (FFF) |
| Device dimensions | 615 × 595 × 540 mm |
| Device weight (net) | 32 kg |
| Build volume | 300 × 300 × 245 mm |
| Printing accuracy | ±0.2 mm |
| Minimum layer thickness | 50 μm |
| Hotend | All metal, hardened steel nozzle |
| Max nozzle temperature | 350 °C (both FFF and CFC) |
| Nozzle diameter | 0.4 mm (FFF) / 0.7 mm (CFC) |
| Fibre cutter | Built-in |
| Active chamber heating | Up to 65 °C |
| Max heatbed temperature | 110 °C, fully automatic levelling |
| Max FFF speed | 500 mm/s |
| Max CFC speed | 20 cc/h |
| Supported FFF materials | PLA, PETG, PC, PA, PACF, PETGF |
| Supported CFC fibre | X-CCF, X-CGF |
| Composite tensile strength | Up to 900 MPa |
| Power | 100–120 VAC / 200–240 VAC, 50/60 Hz, max 1350 W |
| Control screen | 5-inch touchscreen |
| Storage | Built-in 32 GB eMMC + USB port |
| Sensors | Plastic breakage, plastic clogging, fibre breakage, fibre clogging |
| Camera | Built-in 1280×720 live view |
| Slicer | FibreSeek Aura (FFF + CFC), Windows / Mac |
| File formats | STL, STP, 3MF |
In the box
- 1 × FibreSeeker 3 continuous fibre 3D printer
- 1 × spool of CCF continuous carbon fibre filament
- 2 × spools of PLA filament
- 1 × printing accessory kit
- Power cord (EU 200–240 V configuration supplied for our customers)
Buying from InnoStation 3D
InnoStation 3D is an authorised reseller of FibreSeeker products in Europe. Every machine ships with EU power configuration, full local warranty support and English-language technical assistance from our team. Need a quote for multiple units, an invoice for company purchase, or advice on whether continuous fibre suits your application? Contact us before ordering and we will help you specify the right setup.
FibreSeeker 3 is manufactured by FibreSeek. InnoStation 3D is an independent authorised reseller.
Experience blazing speed and unmatched efficiency with our cutting-edge chip design. Tailored for multitasking, this powerhouse ensures smooth performance, whether you're streaming, gaming, or running intensive applications.
Armed with high-speed operational memory, our gadget promises seamless navigation and instantaneous app responsiveness. Say goodbye to lags and hello to fluid, real-time interactions.
Never compromise on space with our generous internal storage solutions. Whether you're storing high-resolution photos, videos, or large apps, our device has the capacity to house all your essentials without breaking a sweat.
- Businesses may need to employ various types of legal pages on their websites or mobile apps. Some, like Privacy Policies, are required by law, while others, such as a Terms and Conditions agreement (T&C), are not. Regardless of legal demands, you may find that your company needs one or more legal pages for compliance and optimal operation.
- In this article, we will go over the most common legal pages, walk you through a summary of what each requires, and explain why you may need it. In addition, you'll find a sample template for each type of legal page so you can quickly get started writing your own.
If you have any questions about this product, please let us know by filling out the form below, and we will contact you as soon as possible.