ANTINSKY's most popular material is not one product — it is a family. Every spool shares the same dependable PLA+ core formula, the same 1.75 mm diameter and the same easy printing temperament, but each face is tuned for a different finish and a different job. Understand the editions of ANTINSKY PLA+ and you stop buying "a PLA spool" and start buying the exact finish your model deserves.
The four faces plus the speed edition
| Edition | Signature Look | Best For | Watch-Out |
|---|---|---|---|
| PLA+ (Gloss) | Classic shine | Prototypes, decorative, first prints | Shows every layer under raking light |
| PLA+ Matte | Soft, low-glare | Studio props, product shots, models | Slightly less glossy depth |
| Silk PLA+ | Smooth silky sheen | Vases, display art, jewellery boxes | Keep walls modest for best finish |
| PLA-ROCK | Stony, textured | Terrain, weathered props, dioramas | Consumer spool format, medium speed |
| PLA+ High Speed | Gloss, fast | Fast parts on high-flow hotends | Needs 600 mm/s-class hotend |
Same core chemistry, four workflows
The honest default: glossy PLA+
The straight PLA+ roll is what you reach for to prototype an idea or make everyday functional prints. It threads through any 0.4 mm nozzle, sticks eagerly to a cold Cold PEI plate and delivers that familiar glossy surface. As the family baseline it is the calibration spool: tune your machine once and every other edition is a small delta on top.
The studio-finish pick: matte
ANTINSKY PLA+ Matte replaces shine with a soft, velvety surface that scatters light instead of reflecting it. For product mock-ups shot on a softbox table, or terrain that should read "crafted and sealed" rather than "slick plastic", matte is clearly more premium. The low sheen has a bonus: layer lines visually disappear, so a 0.2 mm step stops shouting.
The shiny showpiece: silk
ANTINSKY Silk PLA+ produces a rich satin shimmer with almost no visible layer-step texture. Vases, abstract art and shelf pieces benefit enormously. Print it a little hotter than standard PLA+ so the silk chains knit smoothly; avoid very low wall counts, because silk is better at looking gorgeous than at taking a hard knock.
The carved-rock look: PLA-ROCK
PLA-ROCK gives a stony, granular texture straight out of the nozzle. Dungeon tiles, ruined walls and weathered cosplay instantly read as carved rock with zero painting. Because the texture lives in the material rather than printed slots, you save hours of post-processing on organic, story-worn surfaces.
Pairing cheat sheet
- Detail hero figure → Matte body + silk accents
- Studio product photograph → Matte (no hot glare)
- Display vase → Silk in spiral/vase mode
- Dungeon terrain → PLA-ROCK walls + matte floor tiles
- Rapid functional prototype → PLA+ HS on a high-flow hotend
Shared habits keep the whole family happy
Because every edition shares the same core PLA+ recipe, you keep one temperature window and one dry-storage habit across the family. Store open spools in a sealed dry box or a ANTINSKY FilaBox; dry anything that has sat out a few days before a showpiece print. All stick to a cold Cold PEI sheet at 45-60 °C, then release easily as the plate cools.
From one family, every finish
The real win is consistency. Switch between Matte, Silk and Rock and you never re-learn bed adhesion, cooling or drying — you only change wall, layer and temperature deltas for the look you want. Buy the whole family and a dry box, and you have a one-stop printing station with zero guesswork. Start glossy, master matte, keep silk for your prettiest prints, and reach for Rock when a part should look carved, not printed.
Explore the full ANTINSKY PLA+ family on innostation3d.net.