Not All Filaments Are Created Equal — Pick the Right One
PLA, PETG, ABS, ASA, TPU, Nylon — each material has unique properties. This guide focuses on the three most practical filaments for makers: PLA, PETG, and ASA.
PLA and PLA+ — The Everyday Workhorse
| Property | PLA | PLA+ (ANTINSKY) |
|---|---|---|
| Print Temp | 190–210°C | 200–220°C |
| Bed Temp | 50–60°C | 50–65°C |
| Tensile Strength | ~50 MPa | ~55–60 MPa |
| UV Resistance | Poor | Poor |
Best for: Prototypes, decorative objects, toys, low-stress parts. ANTINSKY PLA+ offers improved layer adhesion and impact strength.
PETG — The Durable Middle Ground
| Property | PETG |
|---|---|
| Print Temp | 230–250°C |
| Bed Temp | 70–85°C |
| UV Resistance | Good |
Best for: Mechanical parts, outdoor use, functional prototypes. More prone to stringing — use retraction 4–6mm at 40mm/s. Shop ANTINSKY PETG.
ASA — The Outdoor Champion
| Property | ASA |
|---|---|
| Print Temp | 240–260°C |
| Bed Temp | 90–110°C |
| UV Resistance | Excellent |
Best for: Outdoor enclosures, automotive parts, drone frames. Requires enclosure. Shop ANTINSKY ASA.
Quick Decision Guide
- Indoor display/prototype? → PLA+
- Functional outdoor part? → PETG
- Direct sunlight for years? → ASA
- Flexibility needed? → TPU
All three types at InnoStation 3D — factory-sealed, consistent quality.